Often, operators use too much flux. I'd rather use flux pens because they limit the amount of flux used.

Flux can be dropped in small vials, using a sealed or refillable flux pen. Often, operators use too much flux. I'd rather use flux pens because they limit the amount of flux used. I would also prefer to use solder with a flux core, which contains flux and solder alloys. When using solder with flux core and liquid flux, ensure that the flux is compatible with each other.

Often, operators use too much flux. I'd rather use flux pens because they limit the amount of flux used. I would also prefer to use solder with a flux core, which contains flux and solder alloys. When using solder with flux core and liquid flux, ensure that the flux is compatible with each other.
Surface mount welding usually requires a small diameter tin wire, typically in the range of 0.50 to 0.75mm. Through hole welding usually requires a large diameter tin wire, ranging from 1.20 mm to 1.50mm.
The paste can also be dropped with a syringe, although many manual welding methods heat the paste too quickly, causing spillage and tin balls. Flux glue, rather than solder paste, is very useful for replacing area arrangement components.

2023-01-18

The deformation caused by internal forces in die parts. There are only two approaches: stress relief and mechanical reprocessing or a combination of the two.

2023-01-18

Knowledge of die EDM machining method

2022-12-30

Use of flux

2022-12-30

Surface mount welding usually requires a small diameter tin wire, typically in the range of 0.50 to 0.75mm.

2023-01-18

Often, operators use too much flux. I'd rather use flux pens because they limit the amount of flux used.

2023-01-18

Contact

Email:harmony@moldglobal.com

Phone：+8619536460207

Address: Wanhai (Shaohaihui) Kechuang Green Construction Industrial Park, No.6, Tongde Street, Jibei Sub- district, Jiyang District, Jinan City, Shandong Province, china

Hebei kuohuai import&export trading Co.,Ltd.

Public account

Message

TEL